Pipe support & pipe clamps for stainless steel seamless pipes

Stainless steel seamless pipes are widely used in industries where anti-corrossion is required. When installing the pipes & tubes, people usually need a series of industrial products to support or to clamp the pipes and tubes. This series of products is usually known as pipe clamps & pipe supports. And for the stainless steel seamless pipes, usually stainless steel pipe clamps and stainless steel pipe supports are required.

Specifications of stainless steel pipe clamps & Supports

  • DIN 3015
  • DIN 3567
  • DIN 3570
  • MSS SP-58-2009 pipe clamps & supports
  • MSS SP-69 pipe clamps & supports
  • MODEC Standard
  • DANIELI Standard
  • Customized pipe clamp specifications

Types of Pipe clamps & Pipe supports

  • HYDRAULIC PIPE CLAMPS (DIN 3015 SERIES)
  • LIGHT TWO BOLT PIPE CLAMP
  • HEAVY DUTY TWO BOLT CLAMP
  • LIGHT THREE BOLT PIPE CLAMP
  • ALLOY THREE BOLT PIPE CLAMP
  • HEAVY DUTY THREE BOLT PIPE CLAMP
  • RISER CLAMP / EXTENSION PIPE CLAMP
  • FABRICATED RISER CLAMP
  • U BOLT PIPE CLAMPS
  • HOLD-DOWN PIPE CLAMPS
  • INSULATED PIPE SUPPORTS
  • CLAMPED SHOE PIPE SUPPORTS

Size Range

As one of the leading China pipe clamp manufacturers, our factory produces a broad size ranges of stainless steel pipe clamps and supports. Our stainless steel pipe clamps, hangers and supports are fit for pipes with size range as below.

NPS Size 1/4″ inch to 36″ inch; or metric size pipes with O.D 6 mm to O.D 1200 mm.

Our factory manufacturers standard sizes and also customized sizes stainless steel pipe clamps & supports.

Materials of Pipe clamps&supports

Our factory’s stainless steel pipe clamps & pipe supports are available in a wide range of materials upon customers’ request. And here below are the list of some popular materials for manufacturing the pipe clamps and supports.

  • Stainless steel: such as 304 stainless steel, 316 SS / 316L SS, 316Ti and so on. Stainless steel pipe clamps are widely used in applications where anti-corrosion is required.
  • Plastic: Including PP, PA, Nylon, PE, PVC, etc. Pipe clamps with these materials are known as plastic pipe clamps, nylon pipe clamps, PVC pipe clamps and so on.
  • Rubber: rubber pipe clamps are usually refer to the rubber coated or lined pipe clamps.

Introduction about an Precision Honed seamless steel tube manufacturer

Younglee’s steel tube factory is a high quality manufacturer of precision honed seamless steel tubes, and it is one of the leading Honed tube suppliers, chrome plated bar suppliers, chrome plated hollow bar suppliers in China.

Seamless cold drawn steel Honed tube is broadly utilized as cylinder tubes in many industries, it is used to produce and repair hydraulic cylinders and pneumatic cylinders.
Honed tube, cylinder tubes, honed_tubing, honed_pipe
Seamless Steel honed tube usually is produced by two main manufacturing process, which are honing process or skiving & roller burnishing process. The mother tube we usually use “Suitable To Hone” Cold Drawn Seamless Tubes. The process of the honed pipe is determined upon the dimension, mold available and the requirement of the customer.

Materials:
The most popular material of our honed tubes is carbon steel grade SAE 1020. And we also produce honed cylinder tubes in other materials such as SAE 1026, E355 and ST52.3, stainless steel and so on.

Size Range:
As the leading honed tube manufacturer in China, our factory produce honed cylinder tubes in a wide range of metric sizes and imperial sizes.
Inside Diameter 32mm to 600mm; Imperial sizes equally.
We supply our honed tubing in fixed length and random lengths, the max. Length our our honed tube is 14 meters.

Applications:
Our Honed steel tubing is mostly applied for making and repairing hydraulic cylinders and pneumatic cylinders, and our honed steel tubing is ready to use as hydraulic cylinder tubes without any further inside diameter machining.
Besides the above, our honed tubes also can be used in other applications where high precise inside diameter dimension is required and high smoothly inside surface is required.

 

As the professional hydraulic cylinder material manufacturer and supplier, besides honed tubing, our factory also produces below products for cylinder manufacturing and repairing applications.

  1. 1. Chrome plated shafts

Hard Chrome plated shafts are known as chrome plated rods or chrome plated bars also. This series product is another main product line of our factory, it is mostly used to manufacture and repair the hydraulic piston rods. Our hard chrome plated shaft are produced from steel round rod by high precise grinding, polishing, and chrome plated to a certain thickness on the external surface, the thickness of chrome plated layer is usually min. 20 microns. The material of the chrome plated shafts of our factoy can be carbon steel as CK45 (this is known as CK45 chrome plated bar also), SAE 4140, and stainless steel grades 304, 304L, 316, 316L. The available sizes of our chrome plated shaft is from diameter 6 mm to 800 mm, we also provide imperial sizes accordingly.

CK45 Chrome plated rods

  1. 2. Chrome plated hollow bar

Chrome plated hollow bar is known as Chrome plated od tube too, this product has the same function with chrome plated bar, but with much lighter unit weight than that. Using chrome plated hollow bar, the hydraulic cylinder weight can be greatly reduced, so the hydraulic cylinder will be more energy efficient. Our chrome plated tube is produced from seamless hollow bar, by polishing the outside surface and chrome plated to a certain thickness. Our chorme plated tubes can also be honed in inside diameter for manufacturing and repairing telescoping hydraulic cylinders.

 

  1. Outer chrome plated and ID honed tubes

The honed ID tube with outer diameter precision ground and chrome plated is usually designed for Telescopic hydraulic cylinder. This product is actually belongs to the product line of chrome plated tube.

Tips about pipe installation

You may have a lot of questions about pipe installation,

 

Like,

How do you support hanging pipes?

How do you stabilize pipes?

How do you hold a pipe on the wall?

What are the different types of pipe supports?

How to fix pipes better?

How to Reduce Tube/Pipe Vibration?

 

you’ll find pipe support system for your different pipe installation systems, including different type of pipe clamps, hangers, brackets, straps etc.

 

What are pipe clamps, pipe supports and pipe hangers?

A pipe clamp is a bolted pipe attachment which clamps around the pipe to connect the pipe to the remainder of a pipe hanger assembly.

 

A pipe support or pipe hanger is a designed industrial product that transfer the load from a pipe or tube to the supporting structures. The load includes the weight of the pipe proper, the content that the pipe carries, all the pipe fittings attached to pipe, and the pipe covering such as insulation. The four main functions of a pipe support are to anchor, guide, anti-vibration, and support a specified load. Pipe supports used in high or low temperature applications may contain insulation materials.

 

Pipe clamps are widely used for supporting suspended pipes. They are also used to work as clamped pipe shoes. Pipe clamps can be defined as bolted circular or semi-circular pipe attachments that clamp around a pipe or a tube and connect the pipe with other assembly components for proper support. These piping clamps transfer loads of the piping system to the structure. A wide variety of piping clamps are available to use as pipe support attachments.

 

Read below you will know below:

Table of Contents

What are pipe clamps, pipe supports and pipe hangers?

Materials of Pipe clamps

Size Range of Pipe clamps

Specifications of Pipe clamps, Pipe support and pipe hangers

Surface finish of Pipe support

Pipe Clamp insulation

Types of Pipe clamps & Pipe supports Show More

Applications of our Pipe Clamps / Pipe supports

Main advantages of our pipe clamps / pipe support

sitemap1.xml

XML Sitemap
Generated by YoastSEO, this is an XML Sitemap, meant for consumption by search engines.

You can find more information about XML sitemaps on sitemaps.org.

This XML Sitemap Index file contains 4 sitemaps.

 

https://youngleeflange.bossgoo.com/

https://ylpipes.diytrade.com/

http://skylinepipes.chinaexporter.com/

http://skylinepipes.chinaexporter.com/introduce/

http://www.chinaexporter.com/seller/show.php?itemid=228901

http://www.chinaexporter.com/seller/show.php?itemid=228886

http://www.chinaexporter.com/seller/show.php?itemid=228884

http://www.chinaexporter.com/seller/show.php?itemid=228885

Hydraulic Industry News of China 20220310

Here’s how the Russia-Ukraine conflict could hurt your hydraulic cylinder parts supply chain

News says Supply Chain Analysts should be looking to make contingency plans

The Dutch multinational banking business Rabobank have been making predictions about what would happen in the event of a conflict in Ukraine and the fallout from sanctions upon Russia.Read more…

 

5 Best Honed Tube Suppliers in World

Cylinder Honed tube is a very important product in various industries. It is the main material for manufacturing and repairing pneumatic cylinders and hydraulic cylinders. As the quality of honed tubes will directly affect the quality performance of the cylinders, so it is very important to get high quality honed tubes from good honed tube suppliers.

There are many honed tube suppliers in the world, the quantity should be more than 200, even honed tube suppliers in China mainland are more than 100 companies. Some of these suppliers provide high quality and reasonable prices, but there also many suppliers provide very low prices but with bad quality. So how could we find reliable honed tube suppliers with high quality and reasonable prices? Read more…

 

 

What is the most important material we need when build or repair a cylinder?

When building or repairing a hydraulic cylinder or pneumatic cylinder, what is the most important material we need to use? Of course it is honed tube,  and usually honed tube is ready to use for hydraulic and pneumatic cylinder applications without further inside diameter processing.

 

 

Honed cylinder tube usually is manufactured by two main processing methods, which are honing or skiving & roller burnishing methods, from our “Suitable for Honing” Cold Drawn Seamless Pipes. The manufacturing method of the honed tube is determined by sizes, mold available and the request of the client.Read more…

ISO/EN seamless stainless steel tubes

ISO/EN seamless stainless steel tubes is manufactured according to ISO/EN standards, which also includes a wide range of sizes in duplex and super-duplex stainless steels grades.

ISOEN seamless stainless steel tubes
ISO/EN seamless stainless steel tubes

1) Standard
EN/ISO seamless stainless steel tubing is available according to below standards, also customer’s requirements.
– EN 10216-5 TC1 / TC2
– EN 10297-2
– PED 97/23/EC, AD 2000

2)  Steel Grades
Austenitic stainless steel grades: 1.4301/1.4307, 1.4401/1.4404, 1.4541/1.4878, 1.4571, 1.4948
Duplex / super duplex stainless steel grades: 1.4462, 1.4410, 1.4539

3)  Delivery condition
Seamless stainless steel tubes mainly are delivered in below conditions:
– Bright annealed,
– Solution annealed and pickled,
– Annealed and Polished

4)  Size Range
Ruimai can produce seamless stainless steel tubes in a wide size range as below:
Outer Diameter: 3 mm to 508 mm;
Wall thickness: 0.5 mm – 40 mm

5)   Tolerances
EN/ISO seamless stainless steel tubing usually is following the below requirements and the customer’s requests.

Tolerances according to EN ISO 1127
Condition Outside diameter Wall thickness
Cold-worked +/-0.75%, but min. +/-10%, but min.
Cold-worked +/- 0.3 mm (D3) +/- 0.2 mm (T3)
Cold-worked +/- 0.5% (D4) +/- 7.5% (T4)

EN/ISO Standard seamless stainless steel tubes are supplied as:

Stainless steel heat exchanger tubes

Stainless Steel Hydraulic Tubing

Stainless steel instrument tubing

Stainless steel boiler tubes

Line pipes / Flowline pipe

Stainless steel precision tubes

 High temperature tubes /Furnace tubes

Duplex /super duplex steel pipes

Seamless Coiled tubes

Stainless steel capillary tubes

Stainless steel bright annealed tube

Stainless steel U-bend pipes

 

 

 

 

Stainless steel / duplex steel U-bend tubes for heat exchangers

Heat exchanger tubes can also be delivered as U-bent tube / U bend pipe, manufactured according to the common heat exchanger standards. Our basic specification for u bend pipes is ASTM A213/A213M, ASTM A 312/312M, EN 10216-5, and we can also follow various specifications on customers’ requests.

stainless steel u bend tubing for heat exchanger

Technical parameters of U bend pipes: 

  • OD 9.3 – 38 mm
  • Bending radii from 1.5 x OD up to 1,250 mm. Minimum bending radii for OD over 28 mm after agreement.
  • Leg length min. 1,000 mm.
  • Leg length max. 12,000 mm.
  • Heat treatment for radii up to 1,000 mm.

Heat treatment for U bent tube

If specified, we are equipped to carry out heat treatment of bends of the u bend pipes plus minimum 150 mm of leg.

  • Furnace is computer controlled and all data is recorded.
  • We use an Argon protective atmosphere inside the tubes.
  • We can supply all types of annealing for U bent tube: solution annealing, stress relieving and stabilization.

Measuring, cutting, deburring and cleaning of U bent tube

  • U-bend pipes are measured exactly in accordance with relevant standards.
  • All U bend pipes are cut to the specified leg lengths, ends are deburred and the u bend tubes are internally cleaned with air.
  • Before packing, both ends of U-bend pipes are capped with plastic caps.

Stainless steel instrument tubing

Younglee manufacture instrument tubing in a wide range of corrosion-resistant stainless steels and nickel alloys covering outside diameters from OD 2 mm to 50 mm. All sizes of instrument tubing are supplied with smooth surfaces and precise dimensional tolerances reducing the risk of leakages when connecting tubes with couplings.

Instrumentation tubing can be supplied in straight lengths of 6 meters or other lengths, and in coiled tubes.

Instrument tubing characteristics

Instrument tubing is characterized by high cleanliness, and instrumentation tubing with OD larger than 5 mm are delivered with caps on ends for transport protection against inside contamination.

Delivery conditions
Instrument tube /pipe with OD up to 38.1 mm (1.5 in.) are delivered in bright annealed. Instrument pipe /tube with OD larger than 38.1 mm are delivered in the annealed and pickled condition or polished condition.

And of course instrument tubing can be supplied in annealed and pickled condition for all sizes upon customer’s request.

Sizes and tolerance of Instrument tubing / instrumentation tubing

For instrument tube with OD <6 mm, tolerances according to ASTM A632
Size OD, mm Tolerances OD, mm Wall thickness, %
< 6–4.76 +0.10 / -0 +/-10
< 4.76–2.38 +0.08 / -0 +/-10
< 2.38 +0.05 / -0 +/-10

 

For instrument tube with OD 6.35-50.8 mm according to EN 10305-1
Size OD, mm Tolerances OD, mm Wall thickness, %
6.35 – 30 +/-0.08 +/-10
30-50.8 +/-0.15 +/-10

4.Steel grades

Younglee instrument tubing / instrumentation tubing is available in various stainless steel grades, duplex steel/ super duplex steel grade, nickel alloy grades, Titanium alloy grades.

ASTM / AISI: 316 /316L, 304/304L, 321/321H, 316Ti, 347 / 347H, S31803, S32750,S32760, 2205, 904 / 904L.

EN/DIN: 1.4301/1.4307, 1.4401/1.4404, 1.4541/1.4878, 1.4571, 1.4462, 1.4410, 1.4539.

5.Features

Stainless steel instrument tubing / instrumentation tubing is featured by high cleanness, smooth roughness inside surface, good corrosion resistance, accurate dimensions.

6.Applications

Instrumentation tubing / instrument tubing is widely used in instruments, machines, devices in various industrials.

 

 

Heat exchanger tubes/tubing- supplier & manufacturer

Younglee offer an extensive range of austenitic stainless steels, duplex stainless steels titanium tubing for many types of heat exchangers, widely used for the cooling, heating or re-heating of fluids, gases industries, such as condensers, chemical processing and oil refining,, seawater coolers and heaters.

1.Standards of heat exchanger tubes

  • ASTM A213/213M – Specification for seamless ferritic and austenitic alloy-steel boiler, superheater, and heat exchanger tubes；
  • EN 10216-5 – Seamless Steel Tubes for Pressure Purposes – Technical Delivery Conditions – Part 5 Stainless Steel Tubes;
  • Heat exchanger tubes will be used in high pressure and high temperature environment, tubes can be designed to minimum or average wall thickness, requirements according to order.

2.Heat exchanger tubing material/ grade

Younglee manufacture heat exchanger tubes in a wide range of material, including austenitic stainless steels, duplex / super duplex steel grades, and Titanium alloys in ASTM norm or EN/DIN standards.

  • To ASTM standard: 316 /316L, 304/304L, 321/321H, 316Ti, 347 / 347H, S31803, S32750,S32760, 2205, 904 / 904L.
  • To EN /DIN standard: 1.4301/1.4307, 1.4401/1.4404, 1.4541/1.4878, 1.4571, 1.4462, 1.4410, 1.4539.

Our most common material include:

  • 304/304L Stainless Steel heat exchanger tubes
  • 316/316L Stainless Steel heat exchanger tubes
  • Duplex Stainless Steel heat exchanger Tubing

3.Size range & dimension

Younglee can supply heat exchanger tube in imperial sizes and metric sizes, Outside diameter of heat exchanger tubes are normally from 6 mm to 88.9mm(0.24 to 3.5 in.). Special sizes can be made to order.

Three delivery shapes of tubes can be available in Younglee:

In straight lengths(up to 20 meters), in U bent types and C-formed tubes, all of them can be supplied ready to be installed in the tube sheet of shell and tube heat exchangers.

4.Tests to make sure high quality

According to ASTM A213/213M testing relevant standard, 100% tubes Eddy Current and Pressure test will be conducted.

 

Duplex stainless steel pipe | Seamless Tube

Duplex stainless steel pipe is widely used in onshore and offshore environments, where there resistance of localised corrosion, especially pitting, crevice corrosion and stress corrosion cracking is required.

As one of the first class stainless steel seamless pipe manufacturer and supplier, Younglee Tube provides a wide range sizes and grades of duplex stainless steel pipes.

Duplex Pipe Specification:

Duplex pipe of our factory mostly are manufactured according to

  • ASTM A789, ASTM A790,
  • or EN 10216-5 TC1/TC2.
  • Besides these, we also produce duplex pipes according to GB, JIS, GOST standards.

Size Range:

Our factory can manufacture duplex pipe and duplex tube with O.D 10 mm to 219 mm, wall thickness 0.5mm to 15mm.
And duplex pipes are delivered in straight length up to 15 meters, or in U bend types as U bend duplex pipes. We can cut the duplex tubing to exact length upon customer’s requirements.

Material Grades available:

Duplex stainless steel is different from austenitic stainless steel.

Our factory Younglee Tube can produce duplex tubes with duplex stainless steel grades as below:

  • UNS: S31500, S31803, S32205, 2205
  • EN /DIN: 1.4462

Duplex 2205 pipe and tube are the most popular duplex steel pipes in the market, and the most mature duplex steel pipes.

Main advantage of duplex stainless steel pipe and tube

  • Duplex Stainless Steel pipes offers cost-effective and long-term procedures to prevent corrosion.
  • Duplex tubes are more durable in use under high corrosion environment than other stainless steel tubes.
  • Deliver long term of economical service life
  • Remove expensive downtime due to equipment failure
  • Able to bear high steam pressure
  • Eliminate possibilities of Procedure fluid leakage
  • Greatly protect against stress corrosion cracking
  • Higher hardness provide better wear resistance for high precision tubes.

 

Additional information: What is duplex stainless steel?

They’re characterised by large chromium (19–28 percent) and molybdenum (around 5 percent) and reduced nickel contents compared to austenitic stainless steels.

Duplex stainless steels have a mixed microstructure of both austenite and ferrite, the goal being to create a 50/50 combination, though, in commercial metals, the combination might be 40/60 respectively.

The most utilized duplex stainless steels will be the 2205 (22 percent Chromium, 5% Nominal) along with also the 2507 (25% Chromium, 7 percent Nominal); 2507 is called “super duplex” because of its high resistance to rust. The mechanical components of Duplex steels are roughly double those with striking austenitic stainless steels,  which means we can use duplex steel to design thinner gauge tubing. And duplex steel’s resistance to stress corrosion cracking is much superior to 316 stainless steel in chloride solutions. Duplex steel includes a ductile or brittle transition in approximately -50 degrees.

Duplex steels may be easily welded and formed, like austenitic grades. Based on nickel, chromium and molybdenum material, duplex stainless steels are broken up into four chief classes: lean duplex, duplex, super duplex and duplex. This family of stainless steel has great benefits in both engineered and material fabrication expenses.